Pressure5
TL;DW: Pressure5 expands Pressure4 with after-boost and built-in ClipOnly2.
Yup! It’s here. Happy solstice, and welcome to Pressure5 :)
This plugin builds on 2017’s Pressure4 in numerous ways. I made it for my own use: I was mixing an album in Console7 that had to follow a previous album I’d mixed on an analog board, and I needed extensive 2-buss management and the ability to deliver a final output and control mix density across a lot of parameters measured by a meter I’ve invented (which isn’t available, it’s just for my personal use and doesn’t work properly in a releasable way). And now Pressure5 is out and you can have it!
Pressure is a compressor with some unusual controls: there’s a ‘mewiness’ control that manages the way the ratio engages. You can dial in the intensity with which it ‘dynamic inverts’ and super-squishes the audio. It’s got a very wide speed range that can go real fast for a dense, distorted sort of sound, and it’s now got an additional control that nobody else has: ‘PawClaw’. This manages the way ‘mewiness’ handles transients, the intent being to extra-squish the spiky transients on ‘Paw’ or to let them through more on ‘Claw’. It’s very subtle, but it’s there to tailor the way stuff hits the compression in an entirely unique way. I don’t think anything else has a ‘PawClaw’ control, but now you have one :)
It’s free. All this is open source and funded by my Patreon. I’m redirecting that to a more patron-numbers-oriented model and I’ve got a set of new goals for 2022 and beyond, that have to do with where I go once I do Console8: very big console emulation goals based on replicating the sound signatures of some very significant, quite unattainable consoles. Or, you can simply use Pressure5 with my blessing: the rest of what I do is all about bringing people the tools to make music (in tandem with other open source tools) freely and without inhibition. What you know and understand can be the only limit (granted, that can be a big challenge in its own right!)
The other part of Pressure5 is the output stage: Pressure5’s output control has the capacity to boost, into a built-in ClipOnly2. So it’s got that chunky, non-edgy hard clipping drive, that works at all sample rates, as part of the plugin. I intend Pressure5 to be used as a final buss comp/clip stage letting you dial in whatever you need, and then just taking the output and dithering it and being done. If you don’t want to go direct to final release, pad the output control so you’re not clipping anymore and ClipOnly2 will bypass itself like it’s not even there, serving as only a safety clipper.
I hope you like Pressure5 as much as I do. It’s built into the system I’m using as I start up music livestreaming again in 2022, and it’s been on everything I’ve done for months now. And it’s yours, too. :)
download 64 Bit Windows VSTs.zip
download Signed M1/Intel Mac AUs.dmg
download Signed M1/Intel Mac VSTs.dmg
download LinuxVSTs.zip
download Retro 32 Bit Windows VSTs.zip
download Retro PPC/32/64 Mac AUs.zip
download Retro PPC/32/64 Mac VSTs.zip
Mediafire Backup of all downloads
All this is free and open source under the MIT license, brought to you by my Patreon.
Thanks alot Chris and a happy winter solstice!!
Thank you for the light!
Thank you for the presser and may the return of the sun find you having fun.
Happy new year Chris and all Airwindows users !
Chris this is amazing, been searching for a way without too much fiddling to acheive that sort of extreme sound as if its breaking up almost as if the speakers blown :) love the x/y/z filters also – as well as everything else